After getting the gun and putting a couple of batteries in it, you will find that the "red light beam" is awful. I found a simple free way to improve it, all you need is a couple of centimeters of tin foil:
For a bit more information about the mod, click here.
After using this a bit, I found that it was still almost useless. This is because I rarely used it to help aim, as usually I just point the blaster in the general direction of the enemy and fire, and also the lens in the front of the gun moved out of place every time the blaster was put down (If asked I'll explain in more detail).
To make use of space left after I took the "targeter" assembly out, I put in a small single AAA LED torch. This fitted extremely well with only a bit of sanding to get it to fit. I then soldered some new wires in to get everything working. And yes, I am now using 2 AA batteries to power a AAA torch, it is now very bright, and I am confident it is not going to blow the LEDs.
As you will have noticed, there is also a large rubber band on the gun, this increases ranges by I'm guessing another 10ft. I will measure exact ranges if there is enough requests. I think I have given the gun the most power it can handle without a barrel replacement, which I don't currently have supplies for. Unfortunately the accuracy of this gun isn't great, as every so often one of the darts fired will fishtail/spin awkwardly in the air.
If you participate in outdoor Nerf wars, or like "sniping" (I use that term extremely loosely) I would recommend this over the maverick because it can achieve twice as good range with just some rubber bands attached, or over three times the range - like mine - with internal mods as well. However if you play in very confined spaces or with small children then the Maverick would be a better choice, because its significantly faster rate of fire will be much more important than power.